300-410 ENARSI
Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Koncentracijska obuka (izborni ispit)

Osnovne informacije

Dužina

Trajanje

  • 40 časova sa profesorom (min 1/3 praktičan rad na opremi)
  • 60 časova* bez profesora (udaljeni praktičan rad na opremi - nakon kursa)

Znanje

Šta ćete naučiti na ovom kursu?

  • Install, configure, operate, and troubleshoot an enterprise wired network.
  • Advance routing and infrastructure technologies covered in ENCOR
Nakon kursa

Koji su benefiti

Upon completion of this course, candidates will have the skills and knowledge to:

  • Gain the knowledge you need to install, configure, operate, and troubleshoot an enterprise network
  • Qualify for professional-level job roles in advance routing and services
  • Prepare for the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam

Pre kursa

Preduslovi

To fully benefit from this course, you should have the following knowledge and skills:

  • General understanding of network fundamentals
  • Basic knowledge of how to implement LANs
  • General understanding of how to manage network devices
  • General understanding of how to secure network devices
  • Basic knowledge of network automation

Pregled kursa

  • Implementing EIGRP
  • Optimizing EIGRP
  • Troubleshooting EIGRP
  • Implementing OSPF
  • Optimizing OSPF
  • Troubleshooting OSPF
  • Implementing Internal Border Gateway Protocol (IBGP)
  • Optimizing BGP
  • Implementing MP-BGP
  • Troubleshooting BGP
  • Configuring Redistribution
  • Troubleshooting Redistribution
  • Implementing Path Control
  • Exploring MPLS
  • Introducing MPLS L3 VPN Architecture
  • Introducing MPLS L3 VPN Routing
  • Configuring Virtual Routing and Forwarding (VRF)-Lite
  • Implementing DMVPN
  • Implementing DHCP
  • Troubleshooting DHCP
  • Introducing IPv6 First Hop Security
  • Securing Cisco Routers
  • Troubleshooting Infrastructure Security and Services

Praktične vežbe

  • Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
  • Verify the EIGRP Topology Table
  • Configure EIGRP Stub Routing, Summarization, and Default Routing
  • Configure EIGRP Load Balancing and Authentication
  • LAB: Troubleshoot EIGRP Issues
  • Configure OSPFv3 for IPv4 and IPv6
  • Verify the Link-State Database
  • Configure OSPF Stub Areas and Summarization
  • Configure OSPF Authentication
  • Troubleshoot OSPF
  • Implement Routing Protocol Redistribution
  • Manipulate Redistribution
  • Manipulate Redistribution Using Route Maps
  • Troubleshoot Redistribution Issues
  • Implement PBR
  • Configure IBGP and External Border Gateway Protocol (EBGP)
  • Implement BGP Path Selection
  • Configure BGP Advanced Features
  • Configure BGP Route Reflectors
  • Configure MP-BGP for IPv4 and IPv6
  • Troubleshoot BGP Issues
  • Implement PBR
  • Configure Routing with VRF-Lite
  • Implement Cisco IOS DMVPN
  • Obtain IPv6 Addresses Dynamically
  • Troubleshoot DHCPv4 and DHCPv6 Issues
  • Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
  • Configure and Verify Control Plane Policing
  • Configure and Verify Unicast Reverse Path Forwarding (uRPF)

Šta očekivati na ispitu

  • 300-410 ENARSI exam tests your knowledge of implementation and troubleshooting for advanced routing technologies and services.
  • After you pass 300-410 ENARSI, You earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
  • You satisfy the concentration requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, you must pass 350-401 ENCOR exam.

350-410 ENARSI ispitne teme

To earn your CCNP Enterprise certification you must pass the 350-401 ENCOR exam and an eligible concentration exam of your choice, such as 300-410 ENARSI. Passing this exam also earns you the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification. You will be tested on your knowledge of:

1.0 Layer 3 Techologies 35%

1.1 Troubleshoot administrative distance (all routing protocols)

1.2 Troubleshoot route map for any routing protocol (attributes, tagging, filtering)

1.3 Troubleshoot loop prevention mechanisms (filtering, tagging, split horizon, route poisoning)

1.4 Troubleshoot redistribution between any routing protocols or routing sources

1.5 Troubleshoot manual and auto-summarization with any routing protocol

1.6 Configure and verify policy-based routing

1.7 Configure and verify VRF-Lite

1.8 Describe Bidirectional Forwarding Detection

1.9 Troubleshoot EIGRP (classic and named mode)

  • 1.9.a Address families (IPv4, IPv6)
  • 1.9.b Neighbor relationship and authentication
  • 1.9.c Loop-free path selections (RD, FD, FC, successor, feasible successor, stuck in active)
  • 1.9.d Stubs
  • 1.9.e Load balancing (equal and unequal cost)
  • 1.9.f Metrics

1.10 Troubleshoot OSPF (v2/v3)

  • 1.10.a Address families (IPv4, IPv6)
  • 1.10.b Neighbor relationship and authentication
  • 1.10.c Network types, area types, and router types
  • 1.10.c  Point-to-point, multipoint, broadcast, nonbroadcast
  • 1.10.c (ii) Area type: backbone, normal, transit, stub, NSSA, totally stub
  • 1.10.c (iii) Internal router, backbone router, ABR, ASBR
  • 1.10.c (iv) Virtual link
  • 1.10.d Path preference

1.11 Troubleshoot BGP (Internal and External)

  • 1.11.a Address families (IPv4, IPv6)
  • 1.11.b Neighbor relationship and authentication (next-hop, mulithop, 4-byte AS, private AS, route refresh, synchronization, operation, peer group, states and timers)
  • 1.11.c Path preference (attributes and best-path)
  • 1.11.d Route reflector (excluding multiple route reflectors, confederations, dynamic peer)
  • 1.11.e Policies (inbound/outbound filtering, path manipulation)
2.0 VPN Technologies 20%

2.1 Describe MPLS operations (LSR, LDP, label switching, LSP)

2.2 Describe MPLS Layer 3 VPN

2.3 Configure and verify DMVPN (single hub)

  • 2.3.a GRE/mGRE
  • 2.3.b NHRP
  • 2.3.c IPsec
  • 2.3.d Dynamic neighbor
  • 2.3.e Spoke-to-spoke
3.0 Infrastructure Security 20%

3.1 Troubleshoot device security using IOS AAA (TACACS+, RADIUS, local database)

3.2 Troubleshoot router security features

  • 3.2.a IPv4 access control lists (standard, extended, time-based)
  • 3.2.b IPv6 traffic filter
  • 3.2.c Unicast reverse path forwarding (uRPF)

3.3 Troubleshoot control plane policing (CoPP) (Telnet, SSH, HTTP(S), SNMP, EIGRP, OSPF, BGP)

3.4 Describe IPv6 First Hop security features (RA guard, DHCP guard, binding table, ND inspection/snooping, source guard)

4.0 Infrastructure Services 25%

4.1 Troubleshoot device management

  • 4.1.a Console and VTY
  • 4.1.b Telnet, HTTP, HTTPS, SSH, SCP
  • 4.1.c (T)FTP

4.2 Troubleshoot SNMP (v2c, v3)

4.3 Troubleshoot network problems using logging (local, syslog, debugs, conditional debugs, timestamps)

4.4 Troubleshoot IPv4 and IPv6 DHCP (DHCP client, IOS DHCP server, DHCP relay, DHCP options)

4.5 Troubleshoot network performance issues using IP SLA (jitter, tracking objects, delay, connectivity)

4.6 Troubleshoot NetFlow (v5, v9, flexible NetFlow)

4.7 Troubleshoot network problems using Cisco DNA Center assurance (connectivity, monitoring, device health, network health)